All Aluminum conductor - AAC
|Place of Origin: Guangdong China (Mainland)||Surface Treatment: Oxidized||Alloy Or Not: Non-alloy||Al (Min): 1.55mm|
|Brand Name: JIQING||Model Number: AAC||Application: Installation of overhead distribution lines||Wire Gauge: 6|
|Bare conductor: Aluminum conductor|
AAC - All aluminum conductor
Stranded electrical purposes aluminum conductors, 7 up to 19 strands, are for bare conductors usually used in overhead lines.
All aluminum conductors are the most favoured type for use in the construction of relatively short span distribution schemes and are in common use on lines for voltages up to 60kV.
These conductors have great economical advantage when compared with copper type bare conductors and insulated cables regarding installation of overhead distribution lines at low and medium voltages. Bare conductors: low voltage lines. Linking bridges between the dead-end clamps of the high voltage lines installed with aluminium conductors steel reinforced high voltage busbars at the sub-stations.
The kind of bare conductor can be produced as per the following standards,
ASTM B231, IEC 61089 , DIN 48201
|Code Name||Total Area||No. of conductor||Dia. of Wire Conductor||Overall Dia.||Weight||Nominal breaking load||Max. of resistance of at 20°C||Max. AC resistance||Current Rating (1)|
|AWG or MCM||mm2||pc.||mm||mm||kg/km||kgf||Ohm/km||Ohm/km||Ohm/km||A||A|
|** (Class A and Class AA ) ASTM B231 USA Sizes|
|Poppy||1 / 0||53.52||7||3.12||9.4||148||891||0.53872||0.54995||0.65857||230||193|
|Packaging Detail:Packed by Drum|
|Delivery Detail:25 DAYS|